Conveyor belt (incl. chevron belts)

Faults where this part may be needed

• Cuts and gouges at the loading pointLong drop, sharp stones, no impact support.
• Material rolls back on a chevron beltOverload, worn profiles, or angle too steep for the profile.
• Feeder belt cutLarge stones dropping from height, no impact support.

Troubleshooting page: Spillage and carryback under a conveyor — cleaners, skirts and the loading zone → Open the diagnosis →

Usually replaced together

When a belt is replaced, check the fasteners, cleaner blades, skirts, rolls and drum lagging at the same time.

What to send when ordering

• Which conveyor, with a photo.
• Belt: width, length (or centre distance and pulley sizes), carcass, covers, grade and edge type.
• Chevron belts: profile pattern, height, width, pitch and running direction.
• Rolls: diameter, length, shaft diameter, shaft-end type and bearing type.
• Cleaners: belt width, head pulley diameter, blade type and mounting.
• Lagging: drum diameter and face width, rubber or ceramic. Skirts: thickness, height, length, hardness.