BETONPARTSDiagnosis sheet · https://betonparts.com/en/faults/weighing/agg-over/
- Symptom
- One aggregate always over target
- Likely cause
- In-flight value too small, or the gate closes slowly.
- Check
- Gate speed; air pressure.
- Fix
- Adjust the in-flight value; service the gate cylinder.
Manual · Book 3 · § 13.4 · 6.3
Parts you may need
⚠ Every look inside, turn by hand or open step means full lockout first. Never enter a silo or a bin with material in it.
Plant / site
Machine and serial no.
Date
Checked by
Findings and actions
Questions or parts: info@betonparts.com · WhatsApp +905073288473 · quote within 24 working hours