BETONPARTSDiagnosis sheet · https://betonparts.com/en/faults/electrical/drive-overcurrent/
Electrical and control system · Drives and soft starters
Drive overcurrent fault
- Symptom
- Drive overcurrent fault
- Likely cause
- Load jam, short in the cable, or acceleration ramp too fast.
- Check
- Mechanics; insulation test with the drive disconnected; ramp setting.
- Fix
- Free the machine; repair the cable; lengthen the ramp.
Manual · Book 8 · § 14.2
Parts you may need
⚠ Every look inside, turn by hand or open step means full lockout first. Never enter a silo or a bin with material in it.
Plant / site
Machine and serial no.
Date
Checked by
Findings and actions
Questions or parts: info@betonparts.com · WhatsApp +905073288473 · quote within 24 working hours