BETONPARTSDiagnosis sheet · https://betonparts.com/en/faults/belt-conveyors/slip-start/
Belt conveyors and chevron belts · Slipping and stopping
Slips at start when loaded
- Symptom
- Slips at start when loaded
- Likely cause
- Worn lagging, low tension, wet belt, or overload.
- Check
- Check the lagging first, then the take-up and tension.
- Fix
- Re-lag the drive pulley; set the tension; load less at start.
Manual · Book 5 · § 14.2 · 5
Parts you may need
⚠ Every look inside, turn by hand or open step means full lockout first. Never enter a silo or a bin with material in it.
Plant / site
Machine and serial no.
Date
Checked by
Findings and actions
Questions or parts: info@betonparts.com · WhatsApp +905073288473 · quote within 24 working hours